TTL magnetic card reader

1.used in the commercial POS systems etc. 2.using ISO Format card. 3.Bi-direction Read track1,2,3 4.Original manufacture

1. INTRODUCTION 

Triple Track model  is developed for using ISO Format card.

It is Manual Swipe Type Magnetic Card Reader with TTL terminal.

2.CONFIGURATIONS

The Configurations are as follows:

Model No.	Tracks	Color
Triple Track model	three  tracks	Black

  

 

3.FEATURES

A. INTERFACE: TTL. Clock and data output.

  

B. Small compact size.

C. low power consumption.

D. design for reading low coercivity and high coercivity.

E.300 Oe --- 4000 Oe.magnetic cards.

F.Read Credit cards,bankcards,and idcards.

G. Cable Length

90mm* Customized connector are also available.

4.BASIC SPECIFICATION

A. DIMENSION :

Length -90mm

Width - 24mm

Height - 21mm

B. WEIGHT :

25g (Approx.)  with cable

C. POWER SUPPLY :

Voltage: 3.3V---5 Volts DC

D. ENVIRONMENTAL REQUIREMENTS

i Operation : -10C ~ 55C, 20%~90% RH

ii Storage : -30C ~ 70C, 10%~95% RH

iiiHumidity: 0% to 95% RH non-condensing

E. OPERATION LOCUS :

Indoor use

F. SHOCK : 30G, 11ms

G. Case material: ABS plastic

H. Life of Head: 300,000 passes, minimum

 

I.READ speed range:10cm/sec---140cm/sec.(4ips---55ips)

 

5. SPECIFICATION

A. Card Specification

The cards which are used in Triple Track model should be complied with ISO 7810, 7811 and 7812.

Track Position	ISO 1 (IATA)	ISO 2 (ABA)	ISO 3 (MINTS)
Recording Density	210 BPI	75 BPI	210 BPI
Recording Capacity	79 Characters (7bits)	40 Characters (5bits)	107 Characters (5bits)
Card Thickness		0.76 mm ± 0.08 mm

Card width: 0.010 to 0.050 inches 0(.254 to 1.27mm)

 

 

B. MAGNETIC READER

Formats: ISO 7811, AAMVA,ANSI,and CA DMV..(300---4000.Oe).

Swipe speed: 5 to 55 inches per second, bi-directional

Slot width: 0.055 inches (1.37mm)

 

6. TTL Interface

Pin No.	Cable Color	Signal Name
		Triple Track model
1	Red	+5 V
2	Black	Ground
3	Orange	RDD2
4	Yellow	RCP2
5	Brown	CPD1+2+3
6	Green	RDD1
7	Blue	RCP1
8	Grey	RDD3
9	Purple	RCP3

TTL magnetic card reader